Furnace System Repair Services

A broken furnace can make your home uncomfortable and even cause damage, especially during the chilly winter months in Gilbert. That’s why it’s important to act fast when your furnace breaks down. Contact our team members for a professional inspection and prompt repair. Day & Night provides furnace repair services, including emergency assistance, to keep your house warm while avoiding further damage.

why-is-my-furnace-blowing-cold-air

Furnace Repair Process

Finding problems with your heating system is easy for our skilled, knowledgeable team.

  • We will carefully inspect your furnace for any problems that need to be fixed. Our service vans are equipped with a wide variety of parts and tools that allow us to carry out repairs on-site.
  • We will not create any disturbances while working on your furnace. We operate quickly and efficiently, generally completing repairs in four to eight hours.
Gilbert Furnaces - Day & Night Air Conditioning, Furnace, & Plumbing

Furnace System Tune-Up Options

Due to the extreme climate in Gilbert, it’s important to have your furnace cleaned and tested regularly. At Day & Night, our furnace tune-ups examine your complete system to verify that everything functions properly. The blower, wiring, gas burners, and filters are among the most important components we check.

Cleaning the furnace involves inspecting the key parts, such as the heat exchanger and fan. We normally use specific tools to blast air and collect dust and debris. This maintenance keeps your furnace in good condition, allowing you to enjoy a warm home without spending more than necessary.

Furnace System Installation

A furnace makes your home warm and pleasant on chilly evenings in the desert. To keep you and your family comfortable, our technicians provide furnace installation and replacement services for customers in Gilbert, Arizona. When the evening comes and the temperatures drop, you can count on us to provide you with a dependable heating system.

Should I Repair or Replace the Furnace in My House?

You should repair your furnace if it is not leaking carbon monoxide, is less than 10 years old, and the repair costs are less than half of the cost of a new furnace. 

If your furnace is 10 to 15 years old, leaks carbon monoxide, or the repair costs are more than half of the cost of a new furnace, you should consider replacing it. A new system would most likely be much more energy efficient than your current system. Also, if you plan on moving anytime soon, it will benefit potential home buyers.

How Much Do Furnace Repair Services Cost?

The price of a furnace repair is determined by multiple factors including the type of fuel it uses, the brand and model, and the problem. Contact Day & Night for detailed information on pricing and financing. 

How Much Do Furnace Installation Services Cost?

The overall cost of a new furnace depends on the type of system you choose and the degree of difficulty of the installation. Give us a call to discuss pricing specifics and financing options.

Average Furnace Installation Cost

The average cost of a furnace installation is usually between $5,000 and $8,000. Factors include:

  • The Unit Itself (Gas or Electric)
  • The Size of the Unit
  • Efficiency Ratings
  • Cost of Labor
  • The Cost of Warranties.

Average Heat Pump Installation Cost

The cost of heat pump installation in Arizona usually varies from $6,000 to $12,000. Factors that can affect the cost include:

  • Heat Pump Size
  • Efficiency Rating (SEER Rating)
  • Desired Comfort Features
  • Electrical Work
  • Labor Cost
  • Tax Credits and Rebates

How Many Hours Will a Furnace Installation Take?

The time needed to complete a furnace installation differs according to the type of furnace and the size of your home. Our team will work with you to ensure your needs are met and install your furnace as quickly as we can. 

Different Types of Furnace Problems Our HVAC Specialists Can Help You With

Few things frustrate homeowners more than a broken heater. We all have to deal with it at some point in our lives. When it’s your furnace’s time to fail, you will need to repair it as soon as possible. Keep an eye out for warning signals of problems before they get worse. This could help you save money on costly repairs while also extending the life of your current heating system.

Malfunctioning Thermostat

If your thermostat isn't working properly, it can cause the fan to run constantly. This can drain the battery in your thermostat and make your heating system less efficient. To test this, you can change the fan option to "auto" and see if it stops when the heater is turned on at different temperatures.

Dirty Air Filters

Clogged or dirty air filters can restrict airflow. This makes it harder for your furnace to function properly and causes damage over time. To ensure maximum efficiency, we recommend replacing your filters every three months.

Flickering Pilot Light

The pilot light is an essential component of your furnace. Without one, it won't function properly. If the pilot light flickers or has a yellow flame, it may indicate that there is an excessive amount of hazardous carbon monoxide present. If you notice that the color or behavior of the pilot light changes, you should contact a professional technician for help.

Damaged Heat Exchanger

A faulty heat exchanger can result in significant problems. This component is responsible for separating the heat in your furnace from the air that enters your home. Problems can occur if your home becomes too hot or if you fail to change your air filters regularly. If your furnace stops operating, you should call a professional to inspect it. Our team of specialists provides exceptional furnace repair services in Gilbert, Arizona, and has the training necessary to replace your damaged heat exchanger.

Old Blower Belt

The blower belt is a crucial component for starting the furnace fan. This belt may wear out over time and begin to squeak loudly. When this happens, changing the belt might improve the performance of your furnace.

Continuous Cycling

If your furnace regularly turns on and off, it could be due to a filthy filter, restricted airflow, or an inappropriately set thermostat. This continual on/off can increase your energy expenses.

Defective Limit Switch

If your furnace continues to blow air when it should not, there could be an issue with the limit switch. Fortunately, our staff provides extensive furnace maintenance services for local residents and will work with you to fix your broken limit switch.

Furnace Is Not Circulating Air

There could be multiple reasons why your furnace isn't blowing warm air. First, check that the blower is not blocked by debris. If you see a red flashing light, you should contact an expert for assistance.

Why Choose Day & Night for Furnace Services in Gilbert?

Day & Night values customer satisfaction and comfort. Our experts and team members strive to improve our clients’ lives by providing high-quality service.

We offer a range of heating system services, including furnace repair, free quotes on installation, available furnace financing options, and scheduled maintenance programs. There is a reason Day & Night  has grown to service so many homes in Gilbert and other areas in Arizona.

When you choose us, you choose the best:

  • Trust: Our customers know they can trust us to provide quality service at a reasonable price.
  • Expertise: We only hire top-notch, well-trained, and respectable experts who are passionate about making your home comfortable.
  • Detail-Oriented: We take the time to do our job right the first time, every time.
  • Responsive: Life is full of emergencies. We’ll be there when you need us most.
  • Quality: If we wouldn’t do it in our homes, we won’t recommend it for yours.

What to Expect from a Heating Installation from Day & Night

Best-in-Class Warranties

With a commitment to quality and reliability, we offer a comprehensive 10-year parts and labor warranty on new installations.

Next-Day Installation

In many cases, we can offer next-day installation for new systems.

Upfront Pricing

We believe in transparency and honesty. That’s why we provide reliable, straightforward pricing.

Old Fashioned Craftsmanship

We honor the tradition of precision, quality, and care with a commitment to providing dependable, lasting solutions.

Expertise

We only hire top-notch, well-trained experts who are passionate about making sure your home is comfortable.

Detail-Oriented

We take the time to do our job right.

Responsive

Life is full of emergencies. We’ll be there when you need us most.

Quality

We hold ourselves to the highest standard. If we wouldn’t do it in our homes, we won’t recommend it for yours.

Phoenix Furnace Repair

Signs It’s Time To Perform a Furnace Replacement

  • Odd Smell: If there is a foul smell or an unusual odor, it could mean there is a significant problem.
  • Lack of Warm or Cold Air: If the furnace produces warm or cold air, it may indicate a problem.
  • Carbon Monoxide Detection: If the furnace starts to release carbon monoxide, it’s a serious issue.
  • Furnace Running: If the furnace does not turn off, there could be an issue with the furnace or the thermostat.
  • Consistent or Sudden Noises: Your furnace should only produce a quiet whoosh and a faint hum. Loud clunks or bangs may signal a problem.