How Much Money Does the Average Furnace Tune-Up Cost? | Day & Night Air

Having Trouble With Your Furnace in Phoenix?

Nothing’s quite as frustrating as a lack of temperature control in your home, especially during crisp winter days or those hot Phoenix summers. If your furnace hasn’t had a tune-up in more than a year, you may need one to keep your home comfortable. Even if you’re not having issues with your furnace, you should still consider scheduling a furnace tune-up to save yourself money on costly repairs in the long run. Keep in mind that an average furnace tune-up costs between 100 and 200 dollars, so it’s a small price to pay for peace of mind and a well-cared-for furnace.

 

What Is Included In a Furnace Tune-Up?

With all of the expenses related to homeownership, it can be hard to bite the bullet when it comes to another service, especially a furnace tune-up for a furnace that seems to be working well. However, regular furnace maintenance will save you money over time by optimizing your furnace’s efficiency and performance, checking for safety issues before they result in damage or injury, and fixing any minor issues before they become large mechanical problems. When you hire a professional HVAC technician to perform a furnace tune-up, they’ll do the following:

 

1. Inspect the Flue

While performing a furnace tune-up, your technician will inspect the furnace’s flue to ensure a tight connection. This step is to ensure that combustion exhaust gases, including deadly carbon monoxide, leave through the flue instead of leaking into your home.

 

2. Check the Filter

A dirty filter will clog your furnace and significantly affect its performance. Ensure that your filter is regularly swapped out, as your furnace will waste energy and possibly sustain damage from a dirty or clogged filter.

 

3. Start the Furnace and Observe

Your HVAC technician will start your furnace and watch for proper operation of the draft motor, the burner fires, and the blower.

 

4. Clean the Inside of the Furnace

The technician will clean out debris from the interior of your furnace, including the burners, pilot assembly (if you have a pilot light), igniter, and the blower motor. Cleaning the furnace properly removes carbon and improves its performance.

 

5. Test the Igniter

Over time, parts of your furnace wear out, including the igniter. The technician will test the igniter to ensure it’s still working properly.

 

6. Inspect the Pilot (If You Have One)

Not too many modern furnaces include pilot lights, but if yours does, your technician will adjust the pilot to an optimal height to maximize efficiency and performance.

 

7. Adjust the Burners

The HVAC technician will check your burners and ensure that they’re set properly to optimize your furnace’s performance.

 

8. Check Electrical Components, Gas Pressure, and Air Mix

During your furnace tune-up, the technician will check the furnace’s electrical components, including thermostat contacts, safety switches, fan controls, and wiring. Additionally, they’ll check the gas pressure and the mix of chemicals to ensure safe operation and clean burning.

 

9. Inspect Blower Assembly

The blower is one of the most important parts of your furnace, so your technician will inspect the blower assembly including the motor and wheel. The technician may adjust the blower’s speed to maximize the amount of airflow.

 

10. Check the Indoor Coil (If You Have One)

Some furnaces may contain an air conditioning coil. In that case, the technician checks the coil and inspects it for any leaks.

 

11. Inspect the Heat Exchanger and Ducts

The technician will inspect your furnace’s heat exchanger to ensure there are no cracks or problems. A cracked heat exchanger can mean that you need to replace your furnace. The technician will also inspect any visible ducts to ensure there are no leaks. A leaky duct can cause up to 30% heat loss!

 

12. Start the Furnace Again

The last step to a furnace tune-up is starting the furnace up again. Depending on the technician, you may receive a report with what was checked, its condition, and any suggestions for repairs or replacements to ensure maximum efficiency.

 

How Often Should You Get a Furnace Tune-Up?

Having a tune-up done before using the furnace for the first time in the fall is very advisable. Especially because it uses natural gas to heat your home, you can never be too safe when it comes to your and your family. Safety is very important and want to make sure your system is operating to peak potential.

 

How To Choose an HVAC Company for Your Furnace Tune-Up

When scheduling important maintenance such as a furnace tune-up, you need to make sure you pick the right company for the job. Here are a few things to keep in mind when searching for an HVAC company:

  1. Check local reviews and ratings from past customers.
  2. Call the contractor and ask about the pricing and services provided during the furnace tune-up. Ensure that the technician will perform every service you need.
  3. Ask about insurance and licenses. Any reputable HVAC company will not hesitate to provide you with this information. Beware of anyone who is sneaky about their business license or proof of insurance.

 

How Can Day and Night Air Help You?

As local leaders in the Phoenix HVAC industry, the technicians at Day and Night Air are fully-trained and experienced. If you need a furnace tune-up or inspection, call today to get it scheduled! We’re here and ready for any of your questions. Don’t delay!

Call Now Button